N.B.: Questa scheda è da ritenersi puramente informativa e non contiene alcun tipo di garanzia né implicita né esplicita. SE.CO. srl declina ogni responsabilità riguardo all'accuratezza delle informazioni riportate in questa pagina per errori tipografici o errori di altro tipo o per omissioni nel contenuto. I marchi riportati sono dei legittimi proprietari. L'immagine del prodotto è puramente indicativa
QFX3500-48S4Q - Juniper 48 SFP+/SFP and 4 QSFP ports, redundant dual AC power supply, front to back air flow
Per prezzo e disponibilità aggiornati, chiama il numero 0422 919667
Condizioni prodotto
Assistenza pre e post vendita
Servizi logistici
| Dimensions & Weight | |
|---|---|
| Depth: | 71.1 cm |
| Height: | 4.5 cm |
| Weight: | 14 kg |
| Width: | 43.8 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 5 - 90% (non-condensing) |
| Humidity Range Storage: | 0 - 95% (non-condensing) |
| Max Operating Temperature: | 40 °C |
| Max Storage Temperature: | 70 °C |
| Min Operating Temperature: | 0 °C |
| Min Storage Temperature: | -40 °C |
| Expansion / Connectivity | |
|---|---|
| Interfaces: | 48 x SFP+ ¦ 4 x QSFP ¦ 1 x USB ¦ 2 x RJ-45 |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+ |
| Built-in Devices: | Status LCD |
| Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1ab (LLDP) |
| Device Type: | Switch - L3 - Managed |
| Enclosure Type: | Rack-mountable 1U |
| Features: | Layer 3 switching, Layer 2 switching, DHCP support, ARP support, VLAN support, IGMP snooping, IP address filtering, Low-latency queuing (LLQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Quality of Service (QoS), RADIUS support, SSH support, Jumbo Frames support, front to back airflow, Bidirectional Forwarding Detection (BFD), IPv4 support, LACP support, LLDP support, Data Center Bridging (DCB) |
| Jumbo Frame Support: | 9216 bytes |
| MAC Address Table Size: | 96K entries |
| Performance: | Switching capacity: 960 Mbps ¦ Throughput: 1.28 Tbps |
| Ports: | 48 x SFP+/SFP + 4 x QSFP |
| Remote Management Protocol: | SNMP 1, SNMP 2, Telnet, SNMP 3, SSH, SSH-2, CLI |
| Routing Protocol: | OSPF, BGP, IGMPv2, IGMP, VRRP, IGMPv3, MSDP, static IPv4 routing |
| Status Indicators: | LCD display |
| Subtype: | 10 Gigabit Ethernet |
| Miscellaneous | |
|---|---|
| Compliant Standards: | NEBS level 3, VCCI Class A ITE, EN55022 Class A, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, BSMI CNS 13438, FCC CFR47, REACH, CSA C22.2 No. 60950-1, EN 60825-1, FCC Part 15 B Class A |
| Power | |
|---|---|
| Installed Qty: | 2 (installed) / 2 (max) |
| Power Device: | Internal power supply - hot-plug |
| Power Redundancy: | Yes |
| Power Redundancy Scheme: | 1+1 |
| Voltage Required: | AC 120/230 V |
QFX3500-48S4Q - Juniper 48 SFP+/SFP and 4 QSFP ports, redundant dual AC power supply, front to back air flow
