N.B.: Questa scheda è da ritenersi puramente informativa e non contiene alcun tipo di garanzia né implicita né esplicita. SE.CO. srl declina ogni responsabilità riguardo all'accuratezza delle informazioni riportate in questa pagina per errori tipografici o errori di altro tipo o per omissioni nel contenuto. I marchi riportati sono dei legittimi proprietari. L'immagine del prodotto è puramente indicativa

Cisco WS-CAC-2500W AC Power Supply

Codice WS-CAC-2500W_RF

Condizione Refurbished grado A

Garanzia 90 giorni

Cisco Systems WS-CAC-2500W Catalyst 6500 2500W AC Power Supply

Effettua il Login per vedere i prezzi

Per prezzo e disponibilità aggiornati, chiama il numero 0422 919667

Condizioni prodotto

Assistenza pre e post vendita

Servizi logistici

Descrizione

Specification	Description
AC-input type	Autoranging input with power factor correction (PFC). Note Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components.
AC-input voltage	Low-line (120 VAC nominal)—90 VAC (min) to 132 VAC (max) High-line (230 VAC nominal)—170 VAC (min) to 264 VAC (max)
AC-input current	16 A maximum at 230 VAC at 2500 W output 16 A maximum at 120 VAC at 1300 W output
AC-input frequency	50/60 Hz (nominal) (±3% for full range)
Branch circuit requirement	Each chassis power supply should have its own dedicated, fused-branch circuit: For North America—20 A For International—Circuits sized to local and national codes All AC power supply inputs are fully isolated. – Source AC can be out of phase between multiple power supplies in the same chassis, which means that PS1 can be operating from phase A and PS2 can be operating from phase B. – For high-line operation, the power supply operates with the hot conductor wired to a source AC phase and the neutral conductor wired either to ground or to another source AC phase as long as the net input voltage is in the range of 170 to 264 VAC. – Source AC can be out of phase between AC inputs on power supplies that are equipped with multiple AC inputs, which means that power cord 1 can be plugged into phase A and power cord 2 can be plugged into phase B.
Power supply output capacity	1300 W maximum (100–120 VAC) 2500 W maximum (200–240 VAC)
Power supply output	100/120 VAC operation – 15.5 A @ +3.3 VDC – 5 A @ +5 VDC – 10 A @ +12 VDC – 27.5 A @ +42 VDC 200/240 VAC operation – 15 A @ +3.3 VDC – 5 A @ +5 VDC – 10 A @ +12 VDC – 55.5 A @ +42 VDC
Output holdup time	20 ms minimum
kVA rating¹⁷	3520 W (total input power) or 3.6 KVA (high-line operation)
Heat dissipation	10,939 BTU/hour (approx.)
Weight	17.0 lb (7.7 kg)

^17.The kVA rating listed for the power supply should be used as the sizing criteria for both UPS outputs as well as standard circuits and transformers to power a switch.